Test items: such as steady state shear viscosity (η), shear modulus (G(t)), complex viscosity (η*), storage modulus (G'), loss modulus (G'') , Damping (tanδ), etc., can measure material rheological properties, independently control vibration frequency, sample strain, strain rate and temperature, and can also perform steady-state, transient and dynamic shear measurement. The software functions are as follows:

-Dynamic single point test, transient stress relaxation

-Thixotropic ring experiment, step rate scanning

-Dynamic frequency, time and strain sweep

-Temperature step experiment and linear change experiment

-Automatic zero adjustment, automatic gap adjustment and automatic tension

-Constant rate temperature linear change/step experiment

-Constant stress (creep)

-Stress linear change experiment

-Adhesion test (ASTM D2979-95).

Technical parameter: 

Temperature range: -160 -1000℃

Maximum heating rate: 60℃ / min

Axial oscillation displacement range: 1μm-100μm

Axial oscillation force: 0.1-50N

Peliter board: -20～200℃

ETC furnace body: RT-160℃

Sample requirements:  Liquid/soft solid

Test samples:

Charging Standard:

Price to be determined

Equipment location: 

Weihai Institute of Bionics, Jilin University

Administrator: Minghe Sun

Contact: 18043570596